The NovoAbrasive team conducted extensive independent testing of Cutting discs from leading global manufacturers. During a visit to the INTERNATIONAL HARDWARE FAIR ITALY in Milan, the NovoAbrasive team purchased all available Cutting discs from different manufacturers for independent comparative testing. The new NovoAbrasive Extreme Ceramic wheels with an updated ceramic grain formula participated in the tests for the first time.
Testing conditions
All tests were conducted under identical conditions on an automatic machine for cutting steel blanks without the influence of the human factor:
•Equipment: Automatic machine for cutting steel blanks, model: WE-TM-125mm, power: 1000W
•Disc size: 125×1.0×22.23 mm
•Cutting material: Steel A500 (rebar diameter 14 mm)
•Number of cuts: 30 cuts for each disc (excluding those that failed to complete a full cycle)
•Evaluation criterion: Cutting factor calculated from the residual diameter of the wheel
Test results
TOP-3 best results:
1.🥇 NovoAbrasive Extreme Ceramic (Ukraine) - 4.01 cutting factor
2.🥈 Pferd SG (Germany) - 4.01 cutting coefficient
3.🥉 Kronenflex Special (Poland) - 2.71 cutting ratio
Full table of test results
Detailed analysis of test results
🏆 Testing Leaders (cut coefficient 4.0+)
NovoAbrasive Extreme Ceramic and Pferd SG showed identical outstanding results with a coefficient of 4.01. The new Ukrainian formula with ceramic grain was able to match the best German technologies, which is an outstanding achievement.
🥉 High level (cutting ratio 2.0-4.0)
•Kronenflex Special (Poland, 2.71) - a solid result for the Polish manufacturer
•NovoAbrasive Extreme (Ukraine, 2.45) - the previous version showed excellent quality
•NovoAbrasive Profi (Ukraine, 1.91) - stable result of the professional line
⚡ Medium level (cutting ratio 1.0-2.0)
•Norton Expert Metal (Poland, 1.78) - a good result for a well-known brand
•Klingspor Extra 3 Star (Poland, 1.67) - decent quality of the German brand
•Norton (Poland, 1.48) - the standard line showed acceptable results
•Evotools (China, 1.17) - a good result for a Chinese manufacturer
•Easy Cat (Italy, 1.01) - minimum acceptable level
📉 Basic level (cutting ratio 0.5-1.0)
•Kroneflex Supra (Poland, 0.98) - below expectations for a Polish brand
•NovoAbrasive Standard (Ukraine, 0.80) - corresponds to the positioning as a basic line
•Klingspor Special 5 Star (Poland, 0.75) - failed to complete a full cycle (28 cuts)
•Stanley Fatmax (Slovenia, 0.71) - average result for a tool brand
•Far Sait Professional (Italy, 0.67) - failed to complete a full cycle (25 cuts)
❌ Low results (cutting ratio less than 0.5)
Several brands showed unsatisfactory results and were unable to complete the full cycle of 30 cuts:
•Carbodeb (Romania, 0.52) - only 19 cuts
•Erbauer (China, 0.48) - only 17 cuts
•Fast Grinder Plus (Italy, 0.48) - only 18 cuts
•Bosch Pro (Thailand, 0.41) - only 15 cuts
•Red Square Professional (Romania, 0.37) - only 15 cuts
🌍 Analysis by country of production
•Ukraine: Dominates the top (4 positions out of the top 12), including the absolute leader
•Poland: Stable average results (6 brands in testing)
•Germany: Highest quality (Pferd SG - co-winner)
•Italy: Mixed results (from 1.01 to 0.48)
•China: Medium and low performance
•Romania: Low scores for both brands tested
•Slovenia, Thailand: Single representatives with low indicators
📊 Key findings
A revolutionary breakthrough: NovoAbrasive Extreme Ceramic with ceramic grain has set a new quality standard, equaling the world's best.
Ukrainian advantage: NovoAbrasive products took 4 positions out of the top 12, demonstrating consistently high quality of the entire line from Standard to Extreme Ceramic.
German quality: Pferd SG confirmed the reputation of German technology by showing outstanding results.
Problems with well-known brands: Some well-known brands (Bosch Pro, Stanley) showed results below expectations, which emphasizes the objectivity of the testing.
💰 Unbeatable value for money
NovoAbrasive Extreme 125×1.0 mm - only 26 UAH (retail price indicated, discounts are provided to wholesale buyers)
With such outstanding quality and such an affordable price, NovoAbrasive Extreme wheels are unmatched in Europe, making them the ideal choice for both professionals and private users.
Support the Ukrainian manufacturer!
By choosing NovoAbrasive, you get:
•✅ World-class products at an affordable price
•✅ Supporting the Ukrainian economy in difficult times
•✅ Investment in innovation and technology development
•✅ Quality verified by independent tests
Work with NovoAbrasive - choose quality, support Ukraine!
Don't overpay for the brand, invest in efficiency. Choose smart solutions with NovoAbrasive.
