NovoTools Profi Diamond Disc 125x10x22.23 mm, Turbo
Диск алмазний NovoTools Profi 125x10x22,23 мм, Турбо— професійний алмазні відрізні диски 125 мм × 10 мм × посадка 22.23 мм. Серія Extreme— максимальний ресурс та швидкість роботи для промислових умов. Виготовлений на основі абразиву Алмаз (специфікація HOT PRESSED), що забезпечує стабільну якість обробки та тривалий ресурс. Допустима швидкість до 12200 об/хв — безпечна робота на стандартних кутових шліфмашинах. Відповідає стандарту безпеки EN13236.
Features
Basic parameters
| Trademark | NOVOTOOLS |
| Series | Extreme |
| Product type | Diamond cutting disc |
| Diameter, mm | 125 |
| Segment height, mm | 10 |
| Landing, mm | 22.23 |
| Max. speed, rpm | 12200 |
| Country of manufacture | China |
Package
| SKU | DBP125/T |
| Barcode (EAN) | 5060511131865 |
| Packaging, pcs | 1 |
| Transport box, pcs. | 50 |
Material
| Specification | HOT PRESSED |
Certification
| Safety standard | EN13236 |
| ISO 9001:2015 | Confirmed |
Application
Operations
Compatible tool
Processed materials
Industries
Documents
Frequently asked questions
For which materials are 125 mm diamond cutting discs suitable?
Диск алмазний NovoTools Profi 125x10x22,23 мм, Турбо підходить для обробки: Бетон, Залізобетон, Цегла, Камінь, Граніт. Обирайте відповідний режим роботи залежно від твердості матеріалу.
Яка максимальна швидкість обертання для Диск алмазний NovoTools Profi 125x10x22,23 мм, Турбо?
The maximum permissible speed is 12200 rpm. Before starting work, make sure that the idle speed of your tool does not exceed this value. Exceeding the speed may lead to product destruction.
Which tool is suitable for a diameter of 125 mm with a fit of 22.23 mm?
For working with diamond cutting discs with a diameter of 125 mm and a seating hole of 22.23 mm, the following are recommended: Angle grinder (AG).
How is the Extreme series different from other NovoAbrasive series?
NovoAbrasive offers three quality series: Standard — an economical series for household and infrequent professional use. Provides basic quality and safety at an affordable price. Profi — a professional series with an optimal balance of price and performance. Suitable for daily intensive work. Extreme — an industrial series for the toughest conditions. Maximum resource, increased productivity and stable quality under intensive load. Your product — the Extreme series.
What safety standard does this product meet?
Диск алмазний NovoTools Profi 125x10x22,23 мм, Турбо відповідає стандарту безпеки EN13236. Цей стандарт регулює вимоги до міцності, маркування та безпечного використання абразивних інструментів.
How many pieces are in a package and how to order?
Standard packaging contains 1 pc. Transport box — 50 pcs. To order, send a request via the form on the website or contact a regional distributor. We will respond within 24 hours.
Where are NovoAbrasive products manufactured?
NovoAbrasive is a Ukrainian manufacturer of abrasive tools. The products are manufactured on modern equipment using European components and are certified in accredited laboratories in Europe, including MPA Hannover (Germany).
What does "Turbo Wave" mean?
Turbo wave is a type of rim with a wavy edge. This design provides aggressive cutting with good dust extraction and cooling. Suitable for concrete, brick and stone. It is a compromise between the speed of a segmented blade and the clean cut of a solid blade.
Dry or wet cutting - which is better?
Wet cutting (with water) provides better blade life, less dust and a cleaner cut. Recommended for ceramics and porcelain tiles. Dry cutting is more convenient on the job site, but requires cooling breaks. Segmented blades are best suited for dry cutting due to the gaps between the segments.
What is the difference between the Profi, Basic and Standard series?
Profi — professional series with increased resource for difficult conditions (deep cut, extra ceramics, asphalt). Basic — basic series with optimal price/quality ratio for general work. Standard — affordable series for household use and infrequent work.
